PCBA Factory SMT PCBA Assembly emeputa ngwa ngwa PCBA Prototype Service Maka Consumer Electronics
Nkọwapụta ngwaahịa:
| Ihe ndabere: | FR4-TG140 | Nchacha elu: | HASL(Nduzi efu) |
| Ọkpụrụkpụ PCB: | 1.6mm | Ihe mkpuchi na-ere ahịa: | Ọcha |
| Nha PCB: | 90*160mm | Ihuenyo silk: | Nwa |
| Ọnụọgụ oyi akwa: | 2/L | Cu Ọkpụrụkpụ | 35um (1 oz) |
| Ụdị nkwụnye: | SMT+DIP | ngwugwu SMT | 0201, BGA, QFN |
| Ọrụ nnwale | AOI, X-ray, Nnwale ọrụ | Ụdị ndị na-ebubata ihe | Ụlọ ọrụ mgbakọ |
TurnkeyỌrụ:
1. PCB mmepụta
2. Turnkey PCBA: PCB+components+SMT na site-hole mgbakọ+gbachi ịkpụzi&ụlọ
Isi ngwaahịa:
Uru anyị:
1, Programming naFule nyocha
2, IPC-A-610E ọkọlọtọ, E-ule, X-ray, AOI ule, QC, 100% functional ule.
3, Ọrụ ọkachamara.ISO SMT na site na mgbakọ oghere, ihe karịrị afọ 10 ahụmahụ.
4,Asambodo: 94v-0, CE, SGS, FCC, RoHS, ISO9001:2008, ISO14001
5,Oge ikike maka PCBA: afọ 2.
IKARỊ Nhazi PCBA:
| PCBA Turnkey | PCB+ ihe ndị mejupụtara ngwugwu+mkpọkọta |
| Nkọwa mgbakọ | SMT na Thru-hole, PCB ogige mgbakọ |
| Etiti oge | Prototype:10-12arụ ọrụingụbọchị.Iji nnukwu mmadụ18~20woruezeụbọchị |
| Nnwale na ngwaahịa | Nnwale nyocha na-efe efe,E-nlele,Nyocha X-ray, Nnwale AOI, Nnwale arụ ọrụ |
| Ọnụọgụ | Onu ogugu: 1pcs.Prototype, obere usoro, usoro oke |
| Faịlụụdị | PCB: faịlụ Gerber (CAM, PCB, PCBDOC) |
| Akụkụ: Bill of Materials (ndepụta BOM) | |
| Mgbakọ: Họrọ&Ebe faịlụ, Mgbakọ osise | |
| Oke panel PCB | Oke nkeji: 0.25*0.25 sentimita (6*6mm) |
| Oke kacha: 20*20 sentimita (500*500mm) | |
| PCB Solder Ụdị | Mmiri Soluble Solder Paste, RoHS ndu efu |
| Ngwa nkọwa | Na-agafe agafe ruo 01005nha |
| BGA naQFN maka Chip | |
| Mgbakọ SMT nwere akụkụ abụọ | |
| Oghere dị mma ruo 0.8mils | |
| Mwepụ na nnọchi akụkụ | |
| ngwugwu akụrụngwa | Bee teepu, Tube, Reels, Akụkụ rụrụ arụ |
IKARỊ Nhazi PCB:
| 1 | N'ígwé | 1-32oyi akwa |
| 2 | Ụdị ihe eji eme osisi | FR4,Ceramic substrate osisi,aluminom dabeere osisi, elu-Tg, Rogers na ndị ọzọ |
| 3 | Ngwakọta ihe lamination | 4 ruo 6 n'ígwé |
| 4 | Oke kacha | 600 x1200mm |
| 5 | Mkpuchi ọkpụrụkpụ osisi | 0.2 ka 6.00mm |
| 6 | Obosara ahịrị kacha nta | 3 nde |
| 7 | Oghere ahịrị kacha nta | 3 nde |
| 8 | Mpụta oyi akwa ọla kọpa ọkpụrụkpụ | 8.75 ruo 175µm |
| 9 | N'ime oyi akwa ọla kọpa ọkpụrụkpụ | 17.5 ruo 175µm |
| 10 | Dayameta olulu mmiri (mechanical drill) | 0.25 ka 6.00mm |
| 11 | Dayameta oghere emechara (nrụ ọrụ igwe) | 0.20 ka 6.00mm |
| 12 | Nkwenye dayameta nke oghere (ngwuputa igwe) | 0.05mm |
| 13 | Nkwenye ọnọdụ oghere (n'ịkanịkị) | 0.075 mm |
| 14 | Ogo oghere Laser | 0.10mm |
| 15 | Board ọkpụrụkpụ na oghere dayameta ruru | 10:1 |
| 16 | Ụdị ihe nkpuchi solder | Green, Yellow, Black, Purple, Blue, White and Red |
| 17 | Ihe nkpuchi solder kacha nta | Ø0.10mm |
| 18 | Opekempe nha nke mgbanaka nkewa nkpuchi solder | 0.05mm |
| 19 | Solder mkpuchi mmanụ plọg oghere dayameta | 0.25 ka 0.60mm |
| 20 | Nkwenye njikwa mgbochi | ± 10% |
| 21 | Ngwucha elu | HASL(Nduzi efu), ENIG, ọlaọcha imikpu, ọla edo edo edo, tin imikpu na mkpịsị aka ọla edo |
Nbunye ngwa ngwa:
PCBIn Awa 12
PCBA n'ime ụbọchị 3
Ngwa ngwa ngwaahịa:
* Ngwaahịa ọgwụ
* Ngwaahịa ụgbọ ala
* Ngwaahịa ụlọ ọrụ
* Ngwa nkwukọrịta (ngwaọrụ AVL/GPS/GSM)
* Ngwa eletrọnịkị ndị ahịa.
Usoro mgbakọ PCB:
* Njikwa mmemme
Faịlụ PCB → DCC → Mmemme nhazi → nkwalite → ịlele
* Njikwa SMT
PCB Loader → Igwe nbipute ihuenyo → Nyochaa → Ebe SMD → Nyochaa → Ntugharị ikuku → Nnyocha ọhụụ → AOI → Idobe
* PCBA njikwa
THT → Ịgbado ọkụ (akwụkwọ ntuziaka) → Nnyocha ọhụụ → ICT → Flash → FCT → Nyocha → ngwugwu → Mbupu
PHILIFAST na-enye gị ahụmịhe nrụpụta na mgbakọ PCB kacha mma
